Using Sd Card; Notes On Handling Sd Cards; Available); Structure Of An Sd Card Folder - Brother BAS-311H Service Manual

5. USING SD CARD

5. USING SD CARD
5-1. Notes on handling SD cards (commercially available)
･ Use an SD card or a multimedia card with a capacity of 2GB or less.
･
Do not disassemble or alter SD cards.
･
Do not bend, drop, scratch or place heavy objects on top of the SD cards.
･
Do not allow the SD cards to become wet, such as with water, oil, solvents, drinks or any other liquids.
･
Do not use or store the SD cards in a locations exposed to strong static electricity or electrical interference.
･
Do not use or store the SD cards in a locations exposed to vibrations or impacts, direct sunlight, extreme dust (or lint),
high temperatures, high humidity, severe temperature fluctuations, or strong magnetic forces (such as from speakers).
･ Do not subject the SD cards to vibration or shocks or remove them from the sewing machine while data reading or
writing is in progress.
･
Data on the SD cards may be lost or damaged due to some malfunction or accident. We recommend backing up
important data.
･
The SD cards that you purchased is already formatted. We recommend that the SD cards not be reformatted.
･
The recommended SD cards are those sold by SanDisk and Panasonic. Cards from other manufacturers may use
different formatting methods and may not work correctly as a result.
For additional information, refer to the instruction manual included with the SD cards that you have purchased.
*
This product is compatible with SD cards that have been formatted using the FAT16/32 method. Cards that have
been formatted using other formatting methods cannot be used.
*
All other company and product names mentioned in this instruction manual are trademarks or registered
trademarks of their respective companies. However, the explanations for markings such as TM are not clearly
described within the text.

5-2. Structure of an SD card folder

Data type
Control program ¥BROTHER¥ISM¥ISMSYS¥
¥BROTHER¥ISM¥ISMDB**¥
*
'**' represents the sewing machine ID cord.
(memory switch No.752)
Sewing data
If you would like to keep additional sewing data
for different sewing machines on a single SD
card, change the folder name.
Memory switch Same as above
Parameter Same as above
Cycle program Same as above
Error log ¥BROTHER¥ISM¥ISMLDT¥
37
Folder name
BAS-311H
File name
ISM19MN.BVP (Main control program)
ISM19MT.BVP (Motor control program)
ISM19PL.BVP (Panel control program)
ISMS0***.sew
*
'***' represents the sewing data number.
ISMMSW.SEW
ISMUPG.SEW
ISMCYC.SEW
Stores the files which relate to error logs.