Adjusting The Home Position; Work Clamp Lift Home Position - Brother BAS-311H Service Manual

8-22. Adjusting the home position

8-22-1. Work clamp lift home position

With the power switch turned off, turn the pulley in the direction of the arrow to set the needle to the needle up
1
stop position (near the highest thread take-up position).
2
3
4
2nd step
While pressing the ▲▼ keys simultaneously, turn on the power
switch.
･ "orG" will flash in the PROGRAM No. display and the
currently-recorded offset value will be displayed in the menu
display.
Press the SELECT key so that the THREAD/CLAMP indicator
illuminates.
2798B
Depress the foot switch to the 2nd step (for a two-pedal foot
switch, depress the start switch).
･
Home position detection for the work clamp lift motor will be
carried out based on the currently-displayed offset value.
･
"orG" will illuminate in the PROGRAM No. display.
*
If you would like to reset, press the RESET key for 2
seconds or more at this time. Then the offset value will be
reset to "0" and home position detection for the work clamp
lift motor will be carried out.
4441Q
BAS-311H
8. ADJUSTMENT
3256B 2789B
2634B
(Continued on next page)
102