Direct Selection; Loading Additional Sewing Data - Brother KE-430D Instruction Manual

6-8. Direct selection

You can use the function keys to directly select user program numbers and cycle program numbers.
U1 to U4 and C-1 to C-4 can be selected using function keys F1 to F4.
U5 to U10 and C-5 to C-9 can be selected by simultaneously pressing combinations of function keys F1 to F4 (addition).
<Key combination table>
U5 / C-5
Or
U8 / C-8

6-9. Loading additional sewing data

Use a CF card with a memory capacity of 32, 64, 128 or 256 MB.
This product is compatible with CF cards that have been formatted using the FAT16 method. Cards that have been
formatted using the FAT32 method cannot be used.
1
2
3
4
End reading.
TM
CF is a trademark of SanDisk Corporation.
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
U6 / C-6
Or
U9 / C-9
CF media indicator lights
While reading
KE-430D, BE-438D
With the power turned off, insert the CF card into the CF
slot.
Note:
• Make sure the CF card is facing the correct way.
• The cover should be closed at all times except when
the CF card is inserted and removed, otherwise dust
may cause trouble.
Turn on the power switch.
Press the or key to select the program number
(200 to 999).
Press the R/W key.
• The buzzer will sound and the selected sewing data
will be loaded from the CF card and copied into the
sewing machine's internal memory.
• The program No. display will change from " P" to the
selected program number.
U7 / C-7
Or
U10
4453Q
4457Q
4421Q
4498Q
48