Writing Sewing Data To Cf Cards - Brother BAS-326G Service Manual

3-6. Writing sewing data to CF cards

1
2
3
4
End data read/write mode
TEST indicator switches off
Press the R/W key.
• [SEd-] will change to [ ALL].
Press the or
written.
* If you select [ ALL], all sewing data (Nos. 100 − 999) will be written at
once.
[When memory switch No. 755 is ON]
The program numbers (0 − 99) will also be displayed and can be
selected. If you select [ ALL] at this time, all sewing data (Nos. 0 − 999)
will be written at once.
Press the R/W key.
• The buzzer will sound and the selected sewing data will be copied from
the internal memory onto the CF card.
• The program numbers that have been written will appear in the
PROGRAM No. display.
* If there is a large volume of data in the internal memory, it will take
some time for all of it to be written. To halt the writing of data, press the
STOP switch. If you then press the RESET key, the display will change
back to [ ALL].
Writing
Press the TEST key.
Turn off the power switch, remove the CF card, and then close the cover
of the CF slot.
BAS-311G, BAS-326G
Select the [w 2] data read/write mode.
key to select the program numbers (100 − 999) to be
3. READING / WRITING DATA
4578Q
4577Q
4977Q
27