Installing The Feed Plate - Brother BAS-311H Service Manual

8. ADJUSTMENT

8-13. Installing the feed plate

Index mark
3343B
NOTE:
Install the feed plate (1) so that the surface with the index mark (U) is facing upward.
Place the rear edge of the feed plate (1) against the stepped part of base plate Y (2) (shaded section (A)) and use a 2 mm
diameter pin (such as a needle) to align the hole in the feed plate (1) with the hole in base plate Y (2); then tighten the two
socket bolts (3).
93 BAS-311H