Bay Tek Games Prize Hub Modular Service Manual page 48

MAIN HUB TROUBLESHOOTING GUIDE
If Entire unit is not recognized by main hub, an entire row of prizes will show unavailable.
Step # 1 - Ensure individual Unit is communicating to Main Hub
Step # 2 - Refer to troubleshooting topics specific to a unit.
Step # 1
Verify 12 volt DC power to unit.
12 Volt power comes from Main Unit's power supply. There are
jumper cables that feed 12 volts to individual units.
(Cable part #'s: AACE1805, AACE1810, AACE1813, AACE1820)
Enter menu and got to "Diagnostic Menu"
Touch
Diagnostic
Menu
Verify dipswitches and flashing LED on unit's 1803 boards.
AACB1803
Spindle Unit
1 Flash from LED
All Dips OFF
Ensure phone cables are secure from silver socket on 1803 boards to correct socket on 1800 board.
AACB1800
HUB NOT RECOGNIZED
Verify Unit is has version number in the #1 slot.
Touch Version
Information
AACB1803
Capsule Unit
2 Flashes from LED
Dips 3 & 4 ON
Locker
(#2 slot is for additional optional units)
Software version should start with:
1 for Spindle
2 for Capsule
3 for Locker
AACB1803
3 Flashes from LED
To Locker Unit
AACE1811
To Capsule Unit
AACE1811
To Spindle Unit
AACE1816
48
Main
Capsule
Unit
Unit
Unit
Locker Unit
Dip 4 ON
Spindle
Unit