BrandMotion 9002-7601 Installation Instructions

Dual Mount Universal Kit Aftermarket CMOS Camera with Optional Parking Gridlines
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in Kit:
Chassis Harness
Camera mounted on license plate bracket
Small bag containing:
Two license plate bolts [optional]
Alternate Camera Mount with Double-sided
Adhesive Foam
Instructions
Safety Precautions:
Work in well ventilated area that is clear of obstructions.
●
Secure vehicle with tire chucks in both front and rear of tires.
●
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
●
Wear safety goggles and snug fitting clothes.
●
Use tools only for their intended purpose and which are in good repair.
●
Only perform this task if confidence, skill, and physical ability permit.
●
NOTE: We strive to provide accurate and up-to-date installation instructions. The latest full color
9002-7601 Instructions 6-10-19
Installation Instructions (Kit # 9002-7601)
instructions can be accessed at ​ w ww.brandmotion.com
Tools & Supplies Needed:
¼" Drill Bit
Multi-meter or computer-safe test light
Ground Eyelet (recommended)
Soldering Iron
Solder (recommended) or T-Taps
Plastic trim removal tool
Rubber Grommet or Silicone Caulk
(recommended)
Vehicle service manual (if needed)
Small sheet metal screws (recommended for
Alternative Camera Mount install)
Page 1 of 5 KB