Page 1
INSTALLATION INSTRUCTIONS Commercial Grade Rear Camera System with 7” Monitor (Kit # 9002-7702) Please read thoroughly before starting the installation and check that kit contents are complete. Items Included in the Kit: Tools & Supplies Needed: 7” Display Monitor with Removable Sunshade...
Page 2
● Only perform this task if confidence, skill, and physical ability permit. NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color instructions, as well as an installation video, please visit www.brandmotion.com Installing Monitor camera, connect to CAM2. It will trigger off the 1.
Page 3
Run the 4-pin camera harness to the location of the monitor and connect to the 4-pin connector on the monitor. Turn the monitor on and the image will be displayed. If not change the video input. 9002-7702 Instructions 04-19-2017.docx Page 3 of 3...