Table of Contents
Advertisement
Rev. 1.1
3 Transport
3.1 Packaging
The type of packaging depends on the individual mode of shipping. If not separately contracted, the
packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH. This rule is in
accordance with the Federal Association for Packaging HPE.
3.2 Tasks before Transport
The following has to be done before transport:
Disconnect all power lines.
The actual transport of the incomplete device and its individual parts requires special care in order to prevent
damages from external forceful impact or careless on- and off-loading. Depending on the mode of
transportation, suitable transport and load securing has to be selected. The incomplete device will be aligned
and leveled by appropriate fastening elements
4 Description of Function
The SMS-18-EH Handpen is operated by a manual trigger. The spray medium will be supplied into the valve
from a pressured container or via a pump. The separately controlled spray air distributes the material into the
actual spray jet. The discharge from the nozzle will be performed through the selected special air cap as flat
or round jet.
4.1 Designated Purpose
CAUTION
The use of other media can cause functional failures, damages or even the destruction
of the device.
The SMS-18-EH Handpen is suitable for the finest application of low-viscous media such as colors or
release agents in plastic moulds, or high-viscous media such as grease. Depending on the selected air cap,
a flat or a round jet can be generated. Depending on the viscosity of the medium to be applied, the
application result can be individually adjusted through the nozzle size, the spray air pressure or also the
material supply pressure. Supply of spray air, control air and material is performed through three hoses. The
SMS-18-EH Handpen is a high-precision device which will be a long-term reliable tool if the following notes
are observed.
Assembly Instructions - Handpen SMS-18-EH
.
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 7 of 19
Advertisement
Table of Contents
