Correct Use; Incorrect Use; Qualification Of Personnel; Transport - Walther Systemtechnik SMS-22 Assembly Instructions Manual

Rev. 1.3

2.4 Correct Use

This device is a needle valve and will be used for processing materials which can be sprayed in continuous
or intermitting operation. Under no circumstances shall aggressive media such as acids, alkaline solutions,
detergents, chemicals or others be sprayed. If you are not sure, please contact the manufacturer if a certain
spray medium is suitable for this device.

2.5 Incorrect Use


Operating the device with insufficient knowledge about the operation, maintenance and care of the de-
vice.

Making changes, extensions or alterations on the device that may hamper its safety without the prior
consent of Walther Systemtechnik GmbH.

Operating the device with defective safety installations or not properly attached or malfunctioning safety
devices.

Using unsuitable materials.

Handling the device while energized

2.6 Qualification of Personnel

Only trained and instructed personnel may conduct work on the equipment.
The responsibilities of the personnel for assembly work, operation, repair work or maintenance work must be
clearly assigned to individuals!
Persons in training may work with the equipment only under supervision of an experienced person.
Personnel
Task
Packaging, Transport
Commissioning
Operation
Troubleshooting, general
Troubleshooting
mechanical
Troubleshooting electrical
Setting up
Maintenance
Repair
Taking out of service,
Storage

3 Transport

3.1 Packaging

The type of packaging depends on the individual mode of shipping. If not separately contracted, the
packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH. This rule is in
accordance with the Federal Association for Packaging HPE.

3.2 Tasks before Transport

The following has to be done before transport:
 Disconnect all power lines.
The actual transport of the incomplete device and its individual parts requires special care in order to prevent
damages from external forceful impact or careless on- and off-loading. Depending on the mode of
transportation, suitable transport and load securing has to be selected. The incomplete device will be aligned
and leveled by appropriate fastening elements
Assembly Instructions - Spray Valve SMS-22
Instructed Personnel with Technical
Personnel Qualification
X
X
-
-
-
-
-
-
.
-
X
X
X
-
X
X
X
X
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 6 of 25
Specialist Supervisor
- -
X -
-
X -
- -
X -
- -
- -
X -
X -