Table of Contents
Advertisement
Rev. 1.1
8.2 Cleaning
IMPORTANT
Only use soft brushes for outside cleaning of the nozzle tips. Never use metal tools
with sharp edges.
Only use soft brushes for outside cleaning of the nozzle tips. Never use metal tools with sharp edges.
Wash equipment thoroughly after use to remove residues and dirt; especially when needle, sealing bush or
nozzle are to be exchanged.
8.3 Inserting new Gasket Elements
IMPORTANT
Gaskets and gasket holders can be damaged.
Do not use any sharp or pointed metallic implements for inserting the sealings!
8.4 Spare Parts
IMPORTANT
Only use original spare parts from the manufacturer!
Wrong or defective spare parts from other manufacturers can damage the device. If
other than original spare parts of the manufacturer will be used, all obligations from the
manufacturer or his sales partners, such as guarantees, service contracts etc will be
forfeited without further notice.
8.5 Customer Service / Support
Walther Systemtechnik GmbH
Hockenheimer Straße 3
D-76726 Germersheim
Germany
Assembly Instructions - Handpen SMS-18-EH
Phone
++49(0)7274-7022-0
Telefax
++49(0)7274-7022-91
Email
info@walther-2000.de
Internet
www.walther-2000.de
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 12 of 19
Advertisement
Table of Contents
