Table of Contents
Advertisement
Rev. 1.1
2 Transport
2.1 Packaging
The type of packaging will be selected according to the mode of transport. If not separately negotiated, the
packaging will be made in accordance with the packaging directive of company Walther Systemtechnik
GmbH. This directive complies with HPE Packaging Regulations.
2.2 Tasks before Transport
The following tasks have to be fulfilled before the actual transport.
Disconnect energy supply lines
Extreme care has to be applied when transporting the incomplete machine and its individual parts in order to
avoid damages from external impacts or careless on- and off-loading. Depending on type and duration of
transport, appropriate transport securing devices have to be used. The incomplete device itself will be
adjusted and leveled by appropriate fastening elements
3 Description of Function
3.1 Purpose of the Partly Completed Device
The special construction supplies the correct lubricant in the required quantity at a given time to a defined
location. The dosing valves are also suitable for the use with oil.
3.2 Type Label
The dosing Valve Station can be identified by an
engraving on the side of the casing which shows the
manufacturing date and also the article number.
Above that it has a type label; this contains more
information for indentifying the device.
IMPORTANT
Always use the engraved data and the data from the type label for spare part orders or
the technical service.
Assembly Instructions - Dosing Valve Station 9741970.0x
.
Type Label
Engraving
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 9 of 31
Advertisement
Table of Contents
Troubleshooting
