Table of Contents
Advertisement
Rev. 1.4
3 Transport
3.1 Packaging
The type of packaging depends on the individual mode of shipping. If not separately contracted, the
packaging is in accordance with the rules and regulations of Walther Systemtechnik GmbH.
3.2 Tasks before Transport
The following has to be done before transport:
Disconnect all power lines.
The actual transport of the incomplete device and its individual parts requires special care in order to prevent
damages from external forceful impact or careless on- and off-loading. Depending on the mode of
transportation, suitable transport and load securing has to be selected. The incomplete device will be aligned
and leveled by appropriate fastening elements
4 Description of Function
4.1 Designated Use
CAUTION
The use of other media can cause functional failures, material damages or even the
complete destruction of the device.
The full jet valves of the VMS-01 series are pneumatically controlled application devices that are perfect for
all applications with little space, such as installations in machines or robots due to their little weight and com-
pact size. The employment of long nozzles facilitates a tilting of the devices towards each other, reducing the
space requirements to a minimum. The valves are preferably used for the application of sealants, adhesives
and oils. The needle piston is alternately impinged on by air, triggering an opening and closing of the needle.
If the control air is cut off or fails, the spring closes the needle. The medium is transported to the valve either
out of a pressure tank or a pump. The valve discharges a full jet. Depending on the nozzle size, media of
different viscosities can be processed.
4.2 Technical Data
General Data
Dimensions [mm] KV-version
Dimensions [mm] LV-version
Weight [g]
Sealing material
Energy Supply
Control air pressure [bar]
Material pressure [bar]
4.3 Type Label
The type identification is etched in close to the material connection. The serial number is also inscribed in
this area.
Assembly Instructions – Full-Jet Valve VMS-02
.
ca. 144 x 15 x 82
ca. 162 x 15 x 82
ca. 375
Viton
min. 6 (from 50 bar material pressure = 8 bar)
max. 100
(dimensioned drawing see Appendix!)
(dimensioned drawing see Appendix!)
Walther Systemtechnik GmbH – D 76726 Germersheim
Telefon: +49 (0)7274-7022-0 Telefax: +49 (0)7274-7022-91
http://www.walther-2000.de – info@walther-2000.de
Page 7 of 19
Hide quick links:
Advertisement
Table of Contents
