FarmTek PolyMax H1-10 Manual page 25

OPTIONAL ACCESSORIES—ADDITIONAL PURCHASE REQUIRED
INSTALLING THE 110010 TOMATO ROLLERHOOK
As plants mature, it may become necessary to provide adequate support. The 110010
Tomato RollerHook Assembly used with the 110006 or 110007 tomato clips provide the
®
perfect support system, saving you time and money.
1. Hang the assembled RollerHook® from a wire, cable, or frame member above the Dutch
bucket system.
2. Pull cord from the spool so it reaches the desired Dutch bucket.
3. Take one 110006 or 110007 clip, wrap it around the stem of the plant, feed the cord into
the hinged part of the clip, and snap the clip closed to lock cord in place.
4. Move back to the cord spool and tighten to remove slack. To prevent plant damage, do
not overtighten. As the plant grows, add additional clips as needed for support.
*Additional purchase required: Contact your sales representative to purchase Tomato
RollerHook Assemblies for your Dutch bucket recovery system.
®
1
Revision date: 05.13.20 112529
ASSEMBLY*
®
2 3 4
25