Rapid Advance Feature; How To Enter Rapid Advance; How To Exit Rapid Advance Feature - ALLIANCE HWNNE2HP115CW01 Original Instructions Manual

Topload washer

Table of Contents

This feature allows the user to quickly advance through an active

cycle or advance into a cycle from the Ready Mode. This feature

is useful when tests must be performed immediately on a ma-

chine currently in an active cycle. In this case, the user can quick-

ly advance through the cycle to the Ready Mode. At this point,

the user can perform the required tests and then return the ma-

chine to the active cycle.

1. Control must be in Manual Mode. Refer to How to Enter the

Manual Mode.

2. Press the DELICATES (∧) or the COLD (∨) keypad to scroll

through the programmable options until rAPid appears in the

display.

3. Press the START (enter) keypad. The display will show PUSH

then StArt followed by the cycle time and the START (en-

ter) keypad LED will flash.

4. Press the START (enter) keypad to start cycle or, if already in

an active cycle, pressing START (enter) keypad will advance

to the next cycle step.

NOTE: Lid must be closed to start cycle.

5. Continue pressing the START (enter) keypad until the cycle is

completed.

NOTE: The Rapid Advance option must be turned

on for Rapid Advance to work.

Advance through the cycle until reaching the Ready Mode.

DO NOT COPY or TRANSMIT

Rapid Advance Feature

Part No. 204370ENR1

Table of Contents

Show Quick Links

Table of Contents