How To Read The Days Enable Value Table - ALLIANCE HWNNE2HP115CW01 Original Instructions Manual

Programming Control
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until SP1- appears in the
display. Press the START (enter) keypad and SP1 1 will ap-
pear in the display.
4. When SP1 1 appears in the display, press the START (enter)
keypad. A number will appear in the display that corresponds
to the current Special Vend 1 Days Enable Programming Val-
ue.
5. Locate the desired number in the first column of Table 8 .
6. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the current number until correct.
SP1 1, E Ld 1 and LUC 1
VALUE SAT
0* OFF
3 OFF
5 OFF
7 OFF
9 OFF
11 OFF
13 OFF
15 OFF
17 OFF
19 OFF
21 OFF
23 OFF
25 OFF
27 OFF
29 OFF
31 OFF
33 OFF
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
FRI THUR
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
Table 8 continues...
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.

How to Read the Days Enable Value Table

To determine the correct number required to program the Special
Vend Days Enable, Water Leak Detection Days of Week Enable
or the Lucky Cycle Day(s) of Week / Enable, use the following
table.
The Value column contains the number required in step 6. The
other columns correspond to individual days.
Each column of days contains a unique combination of the words
"ON" and "OFF" that indicates if that column's day is turned on
or off when the value is entered. Select the desired combination
of days and enter the number found in the value column.
* The default value programmed at the factory is 0.
WED TUE
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
ON OFF
ON OFF
ON OFF
ON OFF
ON ON
ON ON
ON ON
ON ON
OFF OFF
48
MON SUN
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
Part No. 204370ENR1
ON/OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON
ON