Vend Price 5 Ats 5; Vend Price 6 Ats 6; Vend Price 7 Ats 7; Vend Price 8 Ats 8 - ALLIANCE HWNNE2HP115CW01 Original Instructions Manual

Programming Control

Vend Price 5 AtS 5

This option allows the owner to set the vend price for PERM
PRESS WARM. This vend price will be shown in the display
when PERM PRESS WARM is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until AtS 5 appears in the
display.
4. The keypad LEDs will be lit to show which cycle price is be-
ing programmed.
5. When AtS 5 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.

Vend Price 6 AtS 6

This option allows the owner to set the vend price for PERM
PRESS COLD. This vend price will be shown in the display
when PERM PRESS COLD is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until AtS 6 appears in the
display.
4. The keypad LEDs will be lit to show which cycle price is be-
ing programmed.
5. When AtS 6 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
7. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.

Vend Price 7 AtS 7

This option allows the owner to set the vend price for DELI-
CATES HOT. This vend price will be shown in the display when
DELICATES HOT is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until AtS 7 appears in the
display.
4. The DELICATES and HOT LEDs will be lit to show which
cycle/temperature price is being programmed.
5. When AtS 7 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
(enter) keypad to enter the value of the digit and advance to
the next digit.
7. Press the START (enter) keypad with the last active digit. The
next option, AtS 8, will appear in the display.

Vend Price 8 AtS 8

This option allows the owner to set the vend price for DELI-
CATES WARM. This vend price will be shown in the display
when DELICATES WARM is selected.
1. Control must be in Manual Mode. Refer to How to Enter the
Manual Mode.
2. Press the DELICATES (∧) or the COLD (∨) keypad until
Prog appears in the display. Press the START (enter) keypad,
and AtS 1 will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable options until AtS 8 appears in the
display.
4. The DELICATES and WARM LEDs will be lit to show which
cycle/temperature price is being programmed.
5. When AtS 8 appears in the display, press the START (enter)
keypad.
NOTE: To go back to the current programmable op-
tion without changing the value, press the WARM (<)
keypad.
6. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
38 Part No. 204370ENR1