Assembly - Honda EG3600CX Manual

82Z30000.book 5 ページ ２０１０年６月２５日 金曜日 午後５時５０分
GOVERNOR DISASSEMBLY/ASSEMBLY
Remove the crankcase cover (page 14-3).
GOVERNOR SLIDER

ASSEMBLY:

Spread the governor weight
to install the governor
slider.
After installing the governor
slider, check to be sure it
moves smoothly.
GOVERNOR
HOLDER CLIP
ASSEMBLY:
Install firmly into the
groove of the
governor shaft.
GOVERNOR
WEIGHT (3)
REASSEMBLY:
After installing the
governor weight,
check to be sure
they moves
smoothly.
GOVERNOR
WEIGHT PIN (3)
GOVERNOR WEIGHT HOLDER
(Apply to the weight
installation part and gear)
WASHER (6 mm)
groove
Except
EG3600CX
EG3600CX /EG4000CX:
/EG4000CX:
CYLINDER BLOCK
GOVERNOR SLIDER
ASSEMBLY:
Spread the governor weight
to install the governor slider.
After installing the governor
slider, check to be sure it
moves smoothly.
GOVERNOR
HOLDER CLIP
ASSEMBLY:
Install firmly into the
groove of the
governor shaft.
GOVERNOR
WEIGHT (2)
REASSEMBLY:
After installing the
governor weight,
check to be sure
they moves
smoothly.
GOVERNOR
WEIGHT PIN (2)
GOVERNOR WEIGHT HOLDER
(Apply to the weight
installation part and gear)
CRANKCASE COVER
14-5