Introduction - Fujitsu F2MC-8L Series Application Note

1 Introduction

This application note describes the steps necessary to setup the Softune Workbench
Development Environment to automatically start the selected debugger at start-up of the
Softune Workbench and to load a specified target .abs-file.
The Softune Workbench Development Environment (from here on only called Softune
Workbench of SWB) is to be used to control a debugger. Debugging can be done using
Code Simulator
-
Monitor Debugger
-
Emulator Debugger using ICE
-
Automatic start of debugging at start of the SWB might be used for example in the field of
automatic testing of complete applications or when one wants to use a software
development environment other than Softune Workbench but still wants to be able to debug
the software for example using emulator debugging via ICE (In Circuit Emulator).
© Fujitsu Microelectronics Europe GmbH
Softune Workbench Automatic Debugger Start
Chapter 1 Introduction
- 5 - MCU-AN-300097-E-V11