Fujitsu F2MC-8L Series Application Note page 14

Chapter 4 How to Change Debugger Environment (e.g. changing automatic testing)
The following shows a part of an .sup-file executing no command batch file once at
debugger start and /PRC/set_ROMs.prc before downloading .abs-file and in addition
/PRC/set_RESET.prc after download of .abs-file (the path is relative to the position of the
.prj-file of the corresponding Softune Workbench project):
[Target]
...
Before Batch File=PRC\set_ROMS.prc
After Batch File=PRC\set_RESET.prc
...
[Start]
Batch File=
...
-- END --
MCU-AN-300097-E-V11
Softune Workbench Automatic Debugger Start
- 14 - © Fujitsu Microelectronics Europe GmbH