Right Steer Hose - Raven smartrax Installation Manual

Right Steer Hose

Remove the hose attached to the right steer port of the orbital and attach a provided 3/4" tee fitting to
the orbital. Re-connect the hose to the tee fitting. Connect one end of the supplied right steer hose to
the open port on the tee and the other end to the "B" port on the steering assist valve. It may be
necessary to use the provided 90-degree 9/16" JIC elbow fittings on the steering assisst valve to
ensure the hoses are routed properly.
NOTE: It is important to trace the hoses so that the pressure and tank hoses are not accidentally
swapped for each other. This will cause valve failure. If the Left and Right Steer hoses are swapped,
the machine will steer opposite to the desired direction.
6