1903 With Power Beyond; Mounting The Universal Bracket; Mounting The Steering Position Sensor - Raven smartrax Installation Manual

For ag chem 1903 terragator

Hide thumbs Also See for smartrax:

Table of Contents

Position the bracket on the steel support beam beneath the frame under the cab. Drill holes to fit the

mounting bracket pattern and attach the universal mounting bracket to the machine. Figure below

shows the bracket mounted to the machine with the valve and hoses attached. NOTE: The mount-

ing bracket may need to be altered to allow the valve to fit in small spaces. Additional bolts

and nuts may be needed to properly mount the bracket and valve.

Universal

Mounting bracket

Figures below shows the approximate mounting position of the steering position sensor. Attach the

steering position sensor to the left side steering cylinder using the provided band clamps, screws and

brackets. NOTE: It may be necessary to fabricate a shield so that mud and debris do not hit the

sensor during operation.

Rear portion of

the steering

cylinder

NOTE: A hole in the boot will need to be cut for the linear sensor to slide through.