Riello AMS N User Manual page 37

Keys
1 CODE
2 LIGHT
3 Timer
4 CLOCK
5 SLEEP
6 METHOD
7 TIME (+), (-)
8 HEALTH
9 ON-OFF
10 TEMP (+), (-)
11 fan
12
SWING
13 SWING <>
14 HEALTH AIR FLOW Sets the Health air flow mode
15 FRESH
16 SET
17 POWER/SOFT
18 LOCK
19 Reset
10
8
6
5
4
7
7
3
2
Selects the code (A or B), if no further indication is present, select A
Controls the turning on and off or the display's internal led light on the
indoor unit and of the beep:
- Pressing once the display turns on and there is a beep
- Pressing twice the display turns off and there is a beep
- Pressing three times the display turns off after a few minutes, the
beeper remains on
- Pressing four times the display and the beeper both turn on
Select: Timer-On, Timer-Off, Timer On-Off.
Selects the clock
Selects Night Mode
Selects the Operating Mode between:
AUTO : Automatic
COOL: Cooling
DRY : Dehumidification
FAN : Ventilation
HEAT : Heating
Sets the time and timer
With each pressure on the keys the temperature value shall be increased
or decreased by 1 minute
If the button is kept pressed time will change quickly
Activates the ioniser
Turns the unit on and off
Sets the desired temperature
With each pressure on the keys the temperature value shall be increased
or decreased by 1 degree
Selects the fan speed between:
LOW: Low
MED: Medium
HI: high
AUTO: Automatic
When the speed is set on Auto, the unit shall adapt the ventilation
speed to the temperature in the room.
This activates the horizontal louvre
This activates the vertical louvre
Not available
Confirms the input settings
Sets the Power/Soft function
Activates and deactivates the key and display block on the remote
control
Resets to the default values
10
9
11
12
14
13
15
16
17
19
18
1
37
AARIA