Riello AMS N User Manual page 42

AARIA
12. Setting the timer on automatic start
Through the timer function on automatic
start it is possible to set the time when
the device should start.
Ensure that the current time is correct
before activating the unit.
Activation
After starting the unit:
Press the timer button.
The on symbol blinks on the display,
which also shows the pre-set time.
Operate the time+ and time- keys to
change the time.
Press the set button to confirm.
The "timer" light on the internal unit
lights up.
The ON sign on the display stops blinking
and stays on.
Deactivation
Press the timer button repeatedly
until all references to timer function
disappear from the display.
The "timer" light on the indoor unit
turns off.
The programming is stored by the
remote control and is activated every
time that the user presses the timer
button followed by the set button.
42