Technical And Identification Data - UNIA HARRIER Operating And Maintenance Manual

2.

Technical and Identification Data

HARRIER – is a chisel plough used for ploughless cultivation, which works well in simplified
cultivation technology.
HARRIER B – bolt-protected tine
HARRIER H – NON-STOP hydraulic protection
These machines are delivered with the following accessories as a standard:
•
ø36 Cat. III coupling / ø51N, Cat. IV coupling
•
3m wide frame – 5 tines, spaced of 605mm
•
3m wide frame – 7 tines, spaced of 440mm
•
4m wide frame – 7 tines, spaced of 605mm
•
4m wide frame – 9 tines, spaced of 440mm
•
width between rows of tines: 100cm
•
working depth down to 50cm
•
double spiky roller
•
ø20 bolt protection (HARRIER B)
•
NON-STOP hydraulic protection (HARRIER H)
Optional accessories:
•
a set of warning signs
•
a set of warning signs with lights
•
extension of the barbed roller
The machines are manufactured in the following widths:
3.0m; 4.0m
Frame
Bolt-protected (hydraulically-protected) tine
OPERATING AND MAINTENANCE MANUAL HARRIER
Roller overhang
Fig. 2. Construction of HARRIER
- 10 -
Set of warning signs (lighting)
Leg
Cylinder
Roller extensions (option)
Spiky roller