Nameplate; Technical And Identification Data - UNIA TERIS XL H Series Operating And Maintenance Manual

OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
1.6

Nameplate

For the machine data, see the type plate that is attached to the main frame of the machine, in its
front section on the left.

2. Technical and Identification Data

TERIS XL H / XXL H –
mounted versions, equipped with drawbar, ring shaft and chassis
•
hydraulically foldable roller
•
hitch axle
•
chassis with wheels size 360/55-16 (XL H), and 480/45-17 (XXL H)
•
three sections of Cambridge rollers with ring diameters of 520mm and 505 mm alternately
•
three sections of Cambridge F rollers with ring diameters of 520 mm
and 520 mm alternately
•
three sections of 530 mm Crosskill rollers
The machines are available in the following three options of operating widths: 4.3 m;
5.3m; 6.3 m (XL H) and 7.3 m; 8.3 m; and 9.5 m (XXL H)
Optional accessories:
•
front drag, hydraulically adjustable
•
front skid with screw adjustment
•
ø40/ø50 HITCH
•
set of warning signs with lighting
•
air brake (XL H)
•
small stone container (trough)
cultivating roller of compact design. It is available in drawn and semi-
- 9 -