10
Installation and operation
Prior to installation:
Ensure that valve body and seal material
G
are appropriate and compatible to
handle the working medium.
See chapter 5 "Technical data".
10.1
Installing the ball valve
WARNING
The equipment is subject to pressure!
Risk of severe injury or death!
®
Only work on depressurized plant.
G
WARNING
Corrosive chemicals!
Risk of caustic burns!
®
Wear appropriate protective
G
gear when installing.
CAUTION
Hot plant components!
Risk of burns!
®
Only work on plant that has
G
cooled down.
CAUTION
Do not use additional seals or grease
G
when installing.
Installation work must only be performed
G
by trained personnel.
Use appropriate protective gear as
G
specified in plant operator's guidelines.
761
Installation location:
Do not apply external force to the ball
G
valve.
Choose the installation location so
G
that the ball valve cannot be used as a
foothold (climbing aid).
Lay the pipeline so that the ball valve
G
body is protected against transverse
and bending forces, and also
vibrations and tension.
Inside diameter of the piping must
G
correspond to the nominal diameter of
the ball valve.
Only mount the ball valve between
G
matching aligned pipes.
10.2
Information on the
installation location
Flanged body:
G
Arrange the bolt holes of the
piping and valve in a way that
they - are symmetrical to the two
main axes - are not on the two
main axes.
Inside diameter of the piping must
G
correspond to the nominal diameter of the
ball valve.
Installation position and direction of the
working medium: optional.
26 / 40
CAUTION
Main
axis
Main
axis