Midi/Joystick Connector; Atx Power Supply Connector & Power Switch (Power) - QDI WinneX 5 Manual

Installation Instructions
The serial port UART2 is not available on the back panel. Therefore, we provide a 9-pin
ribbon cable with bracket for UART2 port. (manufacturing option)
Line-in jack, Microphone-in jack, Speaker-out jack and

MIDI/Joystick connector

The Line-in jack can be connected to devices such as a cassette or minidisc player
for playback or recording. The Microphone-in jack can be connected to a microphone
for voice input. The Speaker-out jack allows you to connect speakers or headphones
for audio output from the internal amplifier.
The MIDI/Joystick connector allows you to connect a game joystick or a MIDI device.
Speaker out
ATX Power Supply Connector & Power Switch (POWER)
Be sure to connect the power supply plug to this connector in its proper orientation. The
power switch (POW ER) should be connected to a momentary switch. When powering
up your system, first turn on the mechanical switch of the power supply (if one is pro-
vided), then push once the power switch. When powering off the system, you needn' t
turn off the mechanical switch, just Push once
8
Microphone in
Line in
*
the power switch.
ATX Power Supply Connector
POWER
Manual for WinneX 5
1
UART2
MIDI/Joystick
12V 5V
5VSB 5V
PS-OK -5V
GND
GND
5V
GND
GND GND
PSON
5V
GND
GND
-12V
3.3V
3.3V
3.3V
1