Installation Of All Drivers - QDI WinneX 5 Manual

Installation of All Drivers

A QDI Mainboard Utility CD-ROM is supplied with each mainboard. All drivers can be
installed from this CD-ROM. Before installing all the drivers, check system requirements
such as system memory (at least 32MB for Windows 95/98 system or 64MB for Win-
dows 2000 system) and disk space. Windows 95 or Windows 98 must be fully installed
and running on the system. All running applications should be closed before installing
these drivers.
1. Install INF File for Intel 810 Chipset
The INF Files for Intel® Chipset 810 contains W indows device installation (*.INF)
files that outline to the operating system how the chipset components shall be
configured for the proper functionality. Under Windows 95/98, run
\ChipDrv\Intel\W hitney\inf\Setup.exe for installation. Locate destination directory
to C:\Program Files\Intel\IntelINF in adding new hardware wizard. Please refer to
README.TXT in the directory \ChipDrv\Intel\W hitney\inf\ for more information.
2. Install INF Utility Files for Intel 810 Chipset
Under Windows 95/98, run \ChipDrv\Intel\Whitney\inf utility\Setup.exe for installa-
tion. Locate destination directory to C:\Program Files\Intel\Inflnst in adding new
hardware wizard. Please refer to README.TXT in the directory
\ChipDrv\Intel\Whitney\inf utility\ for more information.
3. Install VGA Drivers
Under W indows 95/98, run \ChipDrv\Intel\Whitney\Display\win9x \Graphics
\Setup.exe for installation.
Please refer to README.TXT in the directory \ChipDrv\Intel\W hitney\Display\win9x
for more information.
Under W indows NT 4.0, run \ChipDrv\Intel\Whitney\Display\NT40
\Graphics\Setup.exe for installation.
Please refer to README.TXT in the directory \ChipDrv\Intel\Whitney\Display\NT40\
for more information.
Under Win2000, the VGA driver should be installed manually. For installation guide,
refer to README.TXT in the directory \ChipDrv\Intel\Whitney\Display\win2k.
4. Install Sound Drivers
Under Windows 95, run \DevDrv\Codec\ad1881\95\driver\Setup.exe for installation.
For W aveSynth MIDI function under Windows 95, ich.inf is contained in the
directory \DevDrv\Codec\ad1881\95\95synth should be installed. (Point to the file ich.inf
--- Right click the mouse --- select install).
Under Windows 98, run \DevDrv\Codec\ad1881\98\Setup.exe for installation.
Under Windows NT 4.0, run \DevDrv\Codec\ad1881\nt40\driver\Setup.exe for installation.
Regarding the WaveSynth MIDI function under W indows NT 4.0, please refer to
README.TXT in the directory \DevDrv\Codec\ad1881\nt40\MIDI.
Manual for WinneX 5
chapter 2
17