Parallel Port Connector And Serial Port Connector; Uart2; Midi/Joystick Connector - QDI KinetiZ 7T User Manual

Installation Instruction
Parallel Port Connector and Serial Port Connector (UART1)
The parallel port connector can be connected to a parallel device such as a printer, while
the serial port connector can be connected to a serial port device such as a serial port
mouse. You can enable/disable them and choose the IRQ or I/O address in "Integrated
Peripherals" from AWARD BIOS SETUP.
Parallel Port
UART1

UART2

The serial port UART2 is not available on the back panel. Therefore, we provide a 9-pin
ribbon cable with bracket for UART2 port. (manufacturing option)
1
UART2
Line-in jack(or Rear out jack), Microphone-in jack, Speaker-out jack
and

MIDI/Joystick connector

The Line-in jack can be connected to devices such as a cassette or minidisc player for
playback or recording. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect speakers or headphones for audio
output from the internal amplifier.
Note: if you choose four speaker output in CT5880 configuration, the Rear out
jack replaces Line-in jack to connects powered speakers for audio output.
The MIDI/Joystick connector allows you to connect a game joystick or a MIDI device.
MIDI/Joystick
Microphone in
Speaker out
Line in(or Rear out ) jact