Table of Contents
Advertisement
Figure 31
Test results
Profile selected in
the Setup page
A summary of test results is displayed on the right, upper part of the screen.
•
Zone A: Core zone: it is the area surrounding the core
•
Zone B: Cladding zone. It surrounds the majority of the
fiber cladding.
•
Zone C: Epoxy ring.
•
Zone D: Ferrule/Contact zone: it identifies a portion of
the ferrule near and around the fiber
NOTE
To return to a Live Camera image, press the Camera key; or press the Full
Screen/Mosaic key view both the live image and a test result simultane-
ously.
In Mosaic mode (see
plays Pass or Fail information; the status of each zone is displayed only in
full screen mode.
Overlay
The Overlay key allows, when selected, to display the limits of each zone and to display
with colors the defaults on the image.
Launching a test of the connector and fiber end-face
"Mosaic Mode" page
User Manual
60), the result of the test only dis-
7SMART102 Rev004
Chapter 6 Scope
Summary of
Test results
Test result in
High mag.
Zone D
Zone C
Zone B
Zone A
59
Advertisement
Table of Contents
Troubleshooting
