Customising The Colorcut Pro Skin To Your Fb550 Cutter - Intec ColorCut FB550 Series Installation & Setup Manual

3.3.4 Customising the ColorCut Pro skin to your FB550 cutter

ColorCut Pro supports a number of dif ferent Intec cutters with dif ferent registration
sensing methods, number of tools and manual or autofeeding methods. Therefore
various 'Skins' which display options and screens will be unique to your specific cutter
model and its features (i.e. the FB550). The Settings Button
which displays the current configuration settings and enables you to set or change the
Cutter "Device Type" / skin that ColorCut Pro has been customised to match.
Depending on the current selection, your main screen may look like
2.
Click the [SETTINGS] button to open the settings dialogue window.
5a
3.
The "Device Type"
setting shows the type of
Intec Cutter that ColorCut Pro
is configured to.
The appearance of the main
screen layout, Productivity
controls, dialogue boxes and
Tool controls will change
based upon the "Device Type"
selected, and not all features
will be available as detailed in
this manual unless you have
selected the cutter type to
match your Intec FB550 Model.
To ensure ColorCut Pro
displays correctly to match
the FB550 with an LCD touch
panel screen, please set the
cutter type to FB550.
Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 27
1
opens a dialogue box
1
5b
C
5a 5b
or .
B