Intec ColorCut FB550 Series Installation & Setup Manual page 24

3.2 Software Installation - Intec ColorCut Pro (Cont.)
To start the installation of the
ColorCut Pro software, simply
click the [ NEXT> ] button.
for CorelDraw will also be installed at this time. If you have CorelDRAW, SKIP to the
next page.
If you have Adobe Illustrator
when the installation has finished click
[ NO ] on the dialogue box asking you
if you wish to review the CorelDRAW
installation instructions.
You should now advance to section 3.3
(Connecting to your computer) in this
manual.
Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 24
If Illustrator is installed on your computer,
please ensure it is not open and running,
otherwise, after the installation you will
be asked to r estart your system befor e
starting ColorCut Pro.
By default the ColorCut Pr
software will automatically install into
Adobe Illustrator if it is installed on your
computer.
If you have Cor elDraw then the Plug-in
, then
o plug-in