Table of Contents
Advertisement
3.1 Assembly of the Stand and Connecting the Vacuum Pump (cont)
Assembly of stand
Locate one side panel, both
cross members and Bolts
Screw the stand feet into
the bottom of side panels
Tighten all bolts with Allen
key supplied.
Assembly of vacuum fan/pump
Connect vacuum hose
(FB550 use supplied connectors)
Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 21
Using the black bolts to
attach the cross members.
Remove the Rubber feet
from the base of Flatbed.
Attach Silencer
(Optional for FB550 models)
Then attach the other side
panel using same method.
Locate the Flatbed on the
stand and fix with bolts.
The assembled unit
Hide quick links:
Advertisement
Table of Contents
