Chapter 3 - INSTALLATION of your ColorCut Flatbed
INSTALLATION overview
3.1 Basic overview of installation steps
3.2. Parts for assembly
3.2.1 Stand components
3.2.2 Vacuum Pump components
3.3.1 Assembly of the stand and cutter
3.3.2 Connecting the Vacuum pump
3.4. Connecting and Power on the Cutter
3.4.1 Turning on the Cutter
3.4.2 Connecting to a Computer
3.5 Installing Tools
3.6 Calibration of the Creasing Tool to the Cutting Tool
3.7 Calibration