THE CONTROL PANEL (Overview of Navigation)
⑦
Offline
When the Default Home screen is displayed, the OFFLINE key takes
the cutter offline. In this mode you cannot send jobs to the cutter.
Pressing the MOVE key will also place the cutter of f-line. You can
move the carriage - r emember after moving the carriage, pr ess ON-
LINE to place the cutter back on-line and enable jobs to be received.
⑧
Enter
After setting a function or condition in the MENU options
press the [ENTER] key to register your setting
⑨
Hard button arrow keys used to INCREASE or DECREASE values on
the LCD panel scr een. Either for TOOL speed/for ce control OR for
changing menu settings or parameters.
The LCD screen will often indicate which key to use to incr ease or
decrease the value. i.e. When T ool 1 is selected, the are displayed
next to the SPEED parameter , indicating you should use the keys.
The symbols ar e displayed next to the FORCE, indicating the
Keys are
used
these values.
⑩
Emergency switch
⑪
Tool Recess
⑫
Power switch
⑬
Vacuum pump connector
⑭
USB interface connector
⑮
SDcard interface connector N/A - This feature is unavailable.
Intec Printing Solutions - Manual for ColorCut flat bed series FB550 ..................................................................................... Page No: 13
to adjust
Cuts the power to the cutter. Depress again to deactivate.
Convenient place to store tools.
⑬
Turns the ColorCut Digital Cutter ON/OFF.
The control cable connector for the Vacuum pump.
Used to connect the cutter to a computer via the
USB interface.
⑫
⑭
[
]
,
⑬