Table of Contents
Advertisement
ATTO Technology, Inc.
Menu Interface for ATTO FibreBridge 2200 R/D, 3100R and 3200R
Chapter 4:
Menu Interface
This section describes the Menu Interface method of accessing ATTO FibreBridge services. The ATTO
FibreBridge service options are accessible using a Command Line Interface (CLI). The CLI is designed
for advanced programmers and integrators. To see a list of available commands type 'help' at the Ready
prompt.
The menu interface provides a user-friendly way of configuring and managing the ATTO FibreBridge
product module and may be invoked at the CLI Ready prompt by typing 'menu'. CLI commands may NOT
be entered while the menu interface is enabled. Typing 'menu' at any menu prompt will return the user
back to the command-line interface. Any parameter modification prompts may be cancelled by pressing
'Enter' at the prompt without typing a value. Confirmation prompts must be answered with 'y' or 'n'.
To access menu options type the letter of the option as it appears on the display followed by a carriage
return or Enter. To return to a previous menu, type 'x' then carriage return or Enter. Note: The ATTO
FibreBridge Services Menu Interface is not case sensitive. (Use of upper or lower case letters is
permitted).
Main Menu
This is the starting point for the Menu Interface. All other menus are descendents of this menu.
FibreBridge Main Menu
A
FibreBridge Configuration...
B
FibreBridge Maintenance...
C
FibreBridge Diagnostics...
D
Save / Restore Configuration...
X
Exit Menu Mode
ATTO FibreBridge Configuration Menu
FibreBridge Configuration Menu
A
FibreBridge Name
B
Fibre Channel Configuration...
C
SCSI Port 1 Configuration...
D
SCSI Port 2 Configuration...
E
Serial (RS-232) Port Configuration...
F
Network Configuration...
X
Return to previous menu...
Notes
Provides option for configuring the
unit
Provides options for performing
maintenance on the unit
Provides options to view or clear
the current error log
Restores the manufacturer's
default settings
Exit the menu and return to the CLI
Notes
Prompt for FibreBridge name
Provides options for configuring
the Fibre Channel interface
Provides options for configuring
SCSI port 1
Provides options for configuring
SCSI port 2
Provides options for reconfiguring
the RS-232 interface
Provides options for configuring
the IP address and parameters
Return to the Main Menu
ATTO Technology, Inc.
21
-
-
ATTO FibreBridge Software Manual
Advertisement
Table of Contents
