Table of Contents
Advertisement
ATTO Technology, Inc.
Set/Display the current subnet mask. If IPDHCP is enabled, then the get command reports the
current IP gateway assigned by the nameserver.
EthernetSpeed
Syntax: set EthernetSpeed [10 | 100 | auto]
Returns
(terse)
(verbose)
Set/Display the ethernet speed. Auto will auto-negotiate speed (default).
If Auto is enabled the value in parentheses indicates the current speed of the ethernet
connection.
Miscellaneous Commands
Info (Immediate)
Syntax: Info
Returns:
(terse)
(verbose)
This option displays version numbers and other product information for key components within
the ATTO FibreBridge.
Help (Immediate)
Syntax: Help [Command Name]
Returns:
(terse)
(verbose)
The Help command displays a list of available commands. When the optional command name is
present, detailed command-specific information will be displayed.
get EthernetSpeed
[10 | 100 | auto ([10|100|UNKNOWN])]
EthernetSpeed = [10 | 100 | auto ([10|100|UNKNOWN])]
"ATTO FibreBridge XX00"
"xxxx"
"xxxx"
"Month Day Year 'Build Time'
"xx"
"x.xx"
"x.xx.xx"
"[SE | HVD | LVD]"
"[SE | HVD | LVD]"
Device
= "ATTO FibreBridge"
Device Version
Device Build
Build Date
NVRAM Revision
CLI Revision
FC Firmware Revision = x.xx.xx
SCSI Port 1
SCSI Port 2
usage
usage + help text...
ATTO Technology, Inc.
ATTO FibreBridge Software Manual
= xxxx
= xxxx
= Month Day Year 'Build Time'
= xx
= x.xx
= "[SE | HVD | LVD]"
= "[SE | HVD | LVD]"
18
-
-
Advertisement
Table of Contents
