Atto Fibrebridge Configuration Service Commands - ATTO Technology FibreBridge 2100R Software Manual

ATTO Technology, Inc.

ATTO FibreBridge Configuration Service Commands

FcAck0 (ATTO FibreBridge 2200R/D & 3200R)
Syntax: set FcAck0 [enabled | disabled]
Returns:
(terse)
(verbose)
Specifies whether ACK0 or ACK1 will be returned in response to a Class 2 FC data frame or
Sequence. Enable this option to send ACK0 at the end of a Sequence. Disable this option to
return an ACK1 frame for each data frame.
FcAddressTranslation
Syntax: set FcAddressTranslation [enabled | disabled]
Returns:
(terse)
(verbose)
Specifies whether LUNs received from the host are translated according to the appropriate
PDAM, LUAM, or VDAM translation rules.
FcAddressLUAM
Syntax: set FcAddressLUAM [bb ll tt]
Returns:
(terse)
(verbose)
Specifies the translation rules applied to Fibre Channel LUNs in the Logical Unit Address Method
format.
FcAddressPDAM
Syntax: set FcAddressPDAM [bb ll tt]
Returns:
(terse)
(verbose)
Specifies the translation rules applied to Fibre Channel LUNs in the Physical Device Address
Method format.
FcAddressVDAM
Syntax: set FcAddressVDAM [bb ll tt]
Returns:
(terse)
(verbose)
get FcAck0
[enabled | disabled]
FcAck0 = [enabled | disabled]
get FcAddressTranslation
[enabled | disabled]
FcAddressTranslation = [enabled | disabled]
get FcAddressLUAM
bb ll tt
FcAddressLUAM = bb ll tt
get FcAddressPDAM
bb ll tt
FCAddressPDAM = bb ll tt
get FcAddressVDAM
bb ll tt
FCAddressVDAM = bb ll tt
ATTO Technology, Inc.
ATTO FibreBridge Software Manual
6
- -