Beginning Initial Configuration - ATTO Technology FastStream SC 5300 Installation And Operation Manual

2 Select Internet Options .
3 In the Internet Options screen, select the
Security tab.
4 Click on the Trusted Sites icon.
5 Click on the Sites button.
6 In the text box Add this Web site to the zone ,
add the IP address of the appliance. You may
use wild cards.
7 Click on Add.
8 Uncheck the Require server verification
check box.
9 Click OK.
10 At the bottom of the Internet Options box, click
on OK and close the box.
Exhibit 2.0-1 One view of how to connect the FastStream into a rack: brackets may be mounted on either the front or
the connector sides of the FastStream.
F a s tS tre a m
e n c lo s u re
a . A tta c h b ra c k e ts to b o th s id e s o f th e F a s tS tre a m
e n c lo s u re u s in g b ra ck e ts a n d sc re w s s u p p lie d b y
A T T O .
Exhibit 2.0-2 Detail of the connector side of the FastStream SC 5300 enclosure.

Beginning initial configuration

1 The ExpressNAV Storage Manager welcome
screen appears. Click on Enter Here.
2 In the box provided, type in the user name and
password.
Note
The default values are user name root and
password Password. The user name is case
insensitive and the password is case
sensitive.It is best practice to change the
default user name and password. Refer to
Changing current user name, password
page 16.
3 The Initial Setup page appears. Continue to
Ensure Drive Integrity
b . A tta c h th e e n c lo s u re /b ra c k e t a ss e m b ly to th e
ra c k u s in g th e s c re w s n e e d e d fo r y o u r ra c k .
on page 9.
F a stS tre a m
e n clo s u re
on
8