ATTO Technology FastStream SC 5300 Installation And Operation Manual page 22

6 Make any changes.
• Appliance name : The appliance name is a
unique 8-character identifier which is
displayed at the top of each screen. You may
find this useful if you are managing multiple
ATTO devices from a single workstation.
Refer to Manage ATTO Devices,
Configurations on page 35.
• Time and date : use a remote time server to
set the time and time zone, or manually set
the time and date. Refer to Date, Time,
TimeZone and SNTP in
Provides an ASCII-based
• Fibre Channel : change the data rate or the
connection mode for each FC port. Refer to
FCDataRate and FCConnMode in
Appendix A.
17
ATTO Technology Inc. FastStream SC Installation and Operation Manual
Appendix A, CLI
Interface.
7
• Assign a hard address . Refer to FC Hard
and FCHardAddress in
• Establish Access through FC Ports :
change whether all drives are available to
both ports, creating one node name for both
ports, or if different node names are to be
created for each port.
• Ethernet management port : change
whether or not you use DHCP for an IP
address, subnet mask and gateway, or
manually change these parameters and set a
DNS server address. Refer to
Appendix A.
When you have completed your changes, click
on Commit .
Appendix A.
IPDHCP in