Configuration Display Page; Scsi Enclosure Services (Ses) - ATTO Technology FastStream SC 5300 Installation And Operation Manual

Configuration Display page

Clicking on Details from the Health and Status
Monitor page gives you added information about
various aspects of the FastStream and attached
storage. Click on the arrow next to the group you wish
to view.
• RAID groups : RAID group names, RAID status,
available Hot Spares, number of drives, RAID
Level, number of partitions, Interleave and total
capacity of each RAID group

SCSI Enclosure Services (SES)

Drive enclosures may have a SCSI Enclosure
Processor which indicates enclosure health status,
drive identification and drive fault identification.
The ATTO FastStream recognizes drive enclosures
that provide SCSI Enclosure Services (SES).
19
ATTO Technology Inc. FastStream SC Installation and Operation Manual
• Partitions : RAID group name, partition ID,
capacity and block size
• Drives: Drive configuration by port, including
drive size and status
• Interfaces : Ethernet management port link
status and Fibre Channel port link, speed,
connection mode, Node Name and Port Name
Use SES to identify individual drives, all the drives in
the same enclosure, all the drives in a single RAID
group, or faulted drives. You may also select drives
and monitor the status of the enclosure.
Note
Not available on the SC 5300