Ocp Cards; Removing The Ocp Filler - Dell EMC PowerEdge C6525 Installation And Service Manual

Figure 57. Installing the liquid cooling heat sink cover
NOTE: If applicable, route and engage the liquid cooling heat sink tubes with the groves in the liquid cooling heat sink
bracket.
Next steps
1. If you are removing a faulty liquid cooling heat sink,
the processor.
2. If you are replacing the liquid cooling heat sink with a standard heat sink
3. If applicable, replace the air
4. Follow the procedure listed in the

OCP cards

Removing the OCP filler

Prerequisites
1. Follow the safety guidelines listed in
2. Remove the expansion card riser
3. Remove the expansion card riser
Steps
Hold and lift the OCP filler from the OCP slot on the chassis.
60 Installing and removing system components
replace the liquid cooling heat sink with liquid leak
shroud.
After working inside your
Safety instructions.
1.
2.
replace the heat
system.
sensor, if not,
sink, if not, remove the processor.
remove