Installing The Expansion Card Riser 2 - Dell EMC PowerEdge C6525 Installation And Service Manual

Figure 24. Removing the expansion card riser 2
Next steps
1. Install the expansion card riser

Installing the expansion card riser 2

Prerequisites
NOTE: You must install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Align the screw holes on the riser with the stand offs on the system board and insert it until the riser card is firmly seated in
the slot..
2. Using a Phillips #1 screwdriver, tighten the screws that secure the expansion card riser 2.
34 Installing and removing system components
2.
Safety instructions.
Before working inside your system.