Locating The Express Service Code And Service Tag - Dell EMC PowerEdge C6525 Installation And Service Manual

Table 1. QSFP port on OCP card indicator codes (continued)
Connection State
Ethernet Link - No Traffic
Ethernet - Traffic
NOTE: The LED blink speed varies according to the traffic bandwidth.
Figure 4. Ethernet port indicator codes
1. Speed indicator
2. Link and activity indicator
Table 2. Ethernet port indicator codes
Convention Status
A Link and activity indicators are off The NIC is not connected to the network.
B Link indicator is green
C Link indicator is amber
D Activity indicator is flashing green Network data is being sent or received.

Locating the Express Service Code and Service Tag

The unique Express Service Code and Service Tag are used to identify the system.
The information tag is located on the rear of the system that includes system information such as Service Tag, Express
Service Code, Manufacture date, NIC, MAC address, QRL label, and so on. If you have opted for the secure default access
to iDRAC, the Information tag also contains the iDRAC secure default password. If you have opted for iDRAC Quick Sync
2, the Information tag also contains the OpenManage Mobile (OMM) label, where administrators can configure, monitor, and
troubleshoot the PowerEdge servers.
Figure 5. Locating the Service Tag of your system
QSFP Upper green LED
Green
Green
Condition
The NIC is connected to a valid network at its maximum port speed.
The NIC is connected to a valid network at less than its maximum port
speed.
QSFP Lower green LED
Green
Blink
Dell EMC PowerEdge C6525 overview 9