Angelo Po 191PI2E Use And Installation Manual page 40

LEVELLING
Adjust the floor-mounted feet (A) to level the appli-
ance.
ASSEMBLY APPLIANCES IN BANKS
To assemble appliances in banks (side by side)
proceed as described below.
1 - Pull off the knob (A).
2 - Remove the knob unit (B).
3 - Undo the screws (C) and remove the control
panels (D).
4 - Apply masking tape to the edges to be
placed side by side.
5 - Apply food-approved sealant to the edges
to be placed side by side.
6 - Place the appliances side by side.
7 - Connect the appliance using the screws and
nuts (E-F).
8 - Remove the excess sealant and the masking
tape.
IT
9 - Apply the sealant to the inside of the lid (G), and
fit it to cover the fixing zone.
10 - Replace the control panels (D) and the knobs
GB
(A-B) on completion of the operation.
A variety of optional installation kits are available for
DE
arranging appliances in banks:
FR
ES
H
English
B
E
F) "Bridge" installation kit
G)Supporting frame kit
H)Supporting beam kit
L
- 16 -
A
C
A D
G
F
IDM-39614401600.tif
IDM-39615401400.tif
M
IDM-39614401800.tif