Angelo Po 090GRG Use And Installation Manual page 27

st
1 PART
nd
2 PART
A
Adjusting gas control valve mini-
mum setting, 21
Adjustments, recommendations for, 21
Appliance and constructor, identifica-
tion, 3
Appliance, decommissioning, 23
Appliance, general description, 4
Appliance, installation, 17
Appliance, lengthy downtimes, 11
Appliance, testing, 21
Appliances in banks, assembly, 18
Assembly appliances in banks, 18
C
Checking gas pressure, 15
Cleaning instructions, 12
Cleaning the burner, 14
Cleaning the cooking plate, 12
Constructor and appliance, identifica-
tion, 3
Controls, description, 8
Conversion of gas supply, 20
D
Decommissioning the appliance, 23
Description of controls, 8
E
Electrical connection, 19
F
Faults, troubleshooting, 15
Fitting the drip tray runner, 9
Fitting the residue drain extension, 9
G
Gas connection, 19
Gas control valve minimum setting,
adjustment, 21
Even partial reproduction of this document without the constructor's consent is forbidden.
The constructor is committed to a policy of continuous improvement, and reserves the right to update this documentation without notice pro-
vided this does not involve safety risks.
© 2002 - Authors of texts, illustrations and paging: IDM esperti in comunicazione tecnica - Forlì (Italy) - The constructor is authorised to reproduce the texts in whole or in part, provided the author is identified.
CONTENTS
ref. chapters
1 GENERAL INFORMATION ................................................ 2
2 TECHNICAL INFORMATION ............................................ 4
3 SAFETY ............................................................................. 6
4 USE AND OPERATION ..................................................... 7
5 SERVICING ..................................................................... 11
6 FAULT .............................................................................. 15
7 HANDLING AND INSTALLATION ................................... 16
8 ADJUSTMENTS ............................................................... 21
9 REPLACING PARTS ....................................................... 22
ANNEXES ..................................................................... I÷VII
INDEX
Gas pressure, checking, 15
Gas supply, conversion, 20
Gas tap, greasing, 22
Gas, checking pressure, 15
General description of appliance, 4
Greasing the gas tap, 22
H
Handling and installation, recom-
mendations for, 16
Handling and lifting, 17
I
Identification of constructor and ap-
pliance, 3
Information for the reader, 2
Installation and handling, recommen-
dations for, 16
Installation of the appliance, 17
Instructions, cleaning, 12
L
Lengthy downtimes of appliance, 11
Lifting and handling, 17
O
Optional accessories, 6
P
Packaging and unpacking, 16
Procedure for requesting service, 3
Purpose of the manual, 2
R
Recommendations
ments, 21
Recommendations for handling and
installation, 16
Recommendations
parts, 22
Recommendations for servicing, 11
- 1 -
Recommendations for use, 7
Replacement of parts, recommenda-
tions for, 22
Replacement of the burner nozzle, 23
Replacement of the pilot light injec-
tor, 23
Room ventilation, 17
S
Safety and information signs, 5
Safety and information, signs relating
to, 5
Safety devices, 5
Safety regulations, 6
Safety, devices for, 5
Safety, regulations for, 6
Service, procedure for requesting, 3
Servicing, recommendations for, 11
Standard accessories, 6
Switching the burner on and off, 8
T
Technical data, 5
Testing of the appliance, 21
Transport, 16
Troubleshooting, 15
U
Unpacking and packaging, 16
Use, recommendations for, 7
for adjust-
Use, useful advice for, 11
Useful advice for use, 11
for replacing
page
IT
GB
DE
FR
ES
English