ABB MNS-Up Service Manual page 61

C O M M U N I C AT I O N B O A R D S
—
Communication boards
The communication boards are located below the control wiring duct in the MNS-Up module.
Figure 11-01 Control wiring duct with integrated communication ports
Figure 11-02 Communication ports in MNS-Up systems
1 Modem
2 SNMP
3 JD1
4 USB
5 2 LED's
6 JR3
7 SW2
8 JR2
9 X3
10 X2
11 X1
12 SW1-9
13 JD8
Turn down the MNS-Up module as described in the DPA500 manual section 5.
Slot for optional Modem/Ethernet card ONLY
Slot for optional SNMP card ONLY
RS232 Sub D9/female PC / laptop connection
PC/laptop connection
green/red LED showing the status of the interface board
Graphical display connection
DIP-SWITCH for multidrop configuration
(RJ 45) multidrop connection (multi-cabinet configuration)
UPS inputs and 12VDC source (X3 5/6)
UPS outputs dry ports (potential free contacts)
Interlock function
Multi-cabinet configuration switch (see 5.1.6 and 6.1.2.4)
Parallel bus connector
ONLY for paralleling cabinets, use optional adapter:
JD5 parallel bus - input connector
JD6 parallel bus - output connecto
61