Recommended Packing Methods; The Packing For Normal Road Transport - ABB MNS-Up Service Manual

Hide thumbs Also See for MNS-Up:

Table of Contents

M N S - U P S E R V I C E M A N U A L

5.2

Recommended packing methods

The sections are protected by suitable packaging during transport and possible intermediate storage.

5.2.1

Transport frame consisting of:

• standardized or euro pallet

• plastic strips

• plastic film

• edge protection

The section are to be placed on standardized pallet. The sections are to be wrapped by plastic film and fixed with the

cuplastic strips to the palIets. Edges of transport section are protected by standardized edge protection.

Figure 5-03

Packing for normal road transport

Standardized pallets are suitable for handling by forklit trucks. To protect them against moisture, the switchgear sections

shall be encased in a foil. A protective drying agent (such as silicagel) shall be provided between the foil and the switchgear.

This shall last for 12 or 24 months.

Corner protection

Transport section

wraped with plastic foil

Stripping tape

Table of Contents

Show Quick Links

Table of Contents