ABB MNS-Up Service Manual page 33

PA C K I N G , S TO R A G E A N D T R A N S P O R TAT I O N
1600 kg at a rope
angle of 120° max.
Figure 5-15 Arrangement of lifting angles (plan view of MNS section), detail values see Table 3-04
Figure 5-16 Crane transport packed sections (left side picture), crane transport unpacked sections (right side picture)
For a rope angle of 90° the permissible load is approximately 40 % larger than the values given in the table.
The arrangements of the lifting angles are shown in Figure 3-15.
Shipping units with one or two cubicIes are equipped with single angles.
Shipping units consisting of three or four sections are equipped with dual angIes.
The sign detailing the tilting danger must not be removed before all sections have been secured
!
to the foundation.
Do NOT place the switchgear down on one edge, there is a danger of considerable mechanical damage.
2400 kg at a rope
angle of 120° max.
≤ 120° ≤ 120°
33